molding process

The research results showed that the gas-assisted full slip extrusion molding process can almost eliminate extrusion die swell and distort.

结果表明，气辅挤出技术可基本消除挤出成型中的挤出胀大和变形，减小压降。

An integrated thermocouple sensor was employed in measurement of melt temperature in injection molding process.

介绍了注射成型中集成式热电偶在熔体温度测量中的应用，并分别对流道中温度分布以及多型腔H型流道系统中靠近上下型腔的熔体温度进行了测量。

Numerical Simulation of the Curing Stage in Reaction Injection Molding Process of Polyurethane

聚氨酯反应注射成型固化过程数值模拟

The liquid composite molding process is an advanced process for manufacturing composites with high performance and low cost., The dry fibrous reinforcements are wetted with the reactive resin in this process.

复合材料液体模塑成型技术（LCM）是一种高性能低成本先进复合材料制造技术，成型过程中干的纤维增强材料被反应性树脂浸渍。

MPI-based analysis of injection molding process and setting of sprue

用MPI分析注射成型工艺确定浇口数量

Objective To determine the molding process conditions of the medicinal carbon granules.

目的确定药用炭颗粒剂的成型(制粒)工艺条件.

The factors causing the warpage include injected material, the structure of product, the structure of mold and molding process. Then, the injection mold of the mobile phone shell with thin-wall metal-insert is optimized to carry on injection experiment.

引起翘曲变形的因素主要包括注塑原料、产品结构、模具结构和成型工艺参数等四个方面。然后，优化了带金属嵌件的手机外壳注塑成型模具，并进行注塑成型实验。

The background and status of the new autoclave/ VARTM integrated molding process technology is discussed in this paper. The system scheme and design principle are presented on basis of the technique principle.

阐述了热压罐/VARTM组合技术提出的背景，介绍了国际上该项技术的发展现状，并根据该技术的原理提出了系统方案和设计思路；

At the aspect of sound effect simulation, after systematic analysis of the injection molding process, a sound simulation platform for injection molding virtual simulation is proposed with directsound. And this method provides a high sense of realism and immersion for virtual injection molding machine environment.

在音效仿真方面，本文通过系统地分析注射成型过程，采用DirectSound建立起了注射成型虚拟仿真的音效仿真平台，该方法从音效方面提供了高度真实感和沉浸感的虚拟注射机环境。

This paper introduced a new type of molding process of plastics-thin wall molding ( TWM) technology and compared it with the traditional injection molding technologies.

介绍了一种新型塑料注塑成型工艺&薄壳成型（TWM）的制品设计、模具设计、专用注射机、计算机辅助工程分析等关键技术的特点和应用前景。

The paper introduces the structure, lay-up, materials option, molding process and performance testing of carbon/ epoxy composite materials secondary mirror substrate.

文章介绍了碳/环氧复合材料两次表面镜基板的结构与铺层、选材与成型工艺，性能测试等内容。

Effects of Molding Process on Property of xPMS-( 1-x) PZN Ceramics

成型工艺对xPMS-（1-x）PZN陶瓷性能的影响

Analysis of cooling time in the injection molding process for plastics

注射模冷却时间分析

Overall responsible for all molding process documents maintain, PFMEA update and optimization.

负责整个注塑制程的文件维护, 过程FMEA的更新和优化.

New arts Discussion on Autoclave/ VARTM Integrated Molding Process

热压罐/VARTM组合成型新工艺

Based on this mechanism, optimization of molding process conditions to reduce gas bubble blemish was proposed.

并据此提出了如何减少气道内壁气泡缺陷的工艺条件.

Technology and Economic Analysis on the Plant Producing Hallow Brick from Coal Refuse by Hard-Plastic Molding Process

煤矸石硬塑成型空心砖厂技术与经济分析

Molding Process Analysis and Mold Design for Cork of Bottle Mouth

瓶口塞注塑工艺分析及模具设计

Multiple response optimizations for simple injection molding process based on SUR.

基于SUR（似不相关回归）的简单注塑过程多响应优化。

So there are more complicated contents to study in the gas-assisted full slip extrusion molding process than in the traditional extrusion molding process.

因此，气辅完全滑移挤出成型技术比传统挤出成型蕴含着更丰富、更复杂的研究内容。

The plastic joints under study are made through an extrusion molding process.

在研究之下的塑料联接通过挤出成型过程被做.

The following main achievements were yielded: ( 1) Based on process characteristics of gas-assisted full slip extrusion molding and the theories of rheology and hydrokinetics etc., under reasonable assumption, full three dimension steady isothermal viscoelastic theoretical model of describing gas-assisted extrusion molding process is established.

针对气辅完全滑移挤出成型过程的特点，基于流变学和流体动力学理论，经合理假设，建立了描述气辅完全滑移挤出成型过程的全三维稳态等温粘弹性理论数学模型。

Familiar with injection machine and injection process or blow molding machine and blow molding process.

熟悉注塑设备及流程或吹塑设备及流程者优先考虑.

The preparation technology of the nano-antibiotic plastics and the injection molding process of their products are discussed and the parameters of the injection molding are optimized. So, the foundation is provided for the preparation and application of the antibiotic plastics.

探讨了纳米抗菌塑料的材料制备工艺及其制品的注射成型工艺，并对注射成型工艺参数进行优化，为抗菌塑料的制备和应用提供了依据。

The shell molding process is one of the advanced technique with high outcome and lower consumption.

冷壳型法是一种高效、低能耗的先进制型技术.

Through analyzing molding process of the circular plug crust , determined injection mold structure with double core-pulling.

通过对圆形插头壳体的工艺分析, 确定了双抽芯的模具结构.

An ALE free surface tracking and mesh generation scheme for injection molding process

充填过程ALE自由面追踪及网格生成方法

The study has presented solutions to further address the defects caused by the film thermal hysteresis during IML injection molding process, it also makes sense for IML injection molding simulation software development in future.

该项研究为进一步解决IML膜的热滞后效应造成的注射成形工艺缺陷提供了思路，为面向IML注塑成形模拟软件的开发做了基础研究，具有一定的意义。

The injection molding process of thermoset plastics bulk molding composition ( BMC) made of automobile lamp reflector is presented in the paper. Process parameters are settled such as barrel temperature, screw speed, injection pressure, injection velocity and holding time and so on.

介绍了热固性团状模塑料（BMC）注射成型汽车前照灯反射镜的工艺过程，确定了BMC注射成型的料筒温度、螺杆转速、注射压力、注射速度和保压时间等工艺参数。

By analyzing the 3D parametric molding process of the rectangular flower-key slot rolling tool, the 3D-molding method of combining parametric features with parametric sketch is put forward.

通过对矩形花键滚刀三维参数化建模过程的分析，提出了将特征参数化和草图参数化结合进行三维建模的方法。